Stains and varnishes in one

Unsurpassed quality '2-in-1' finishes for beautifying and protecting interior timber

Cabot's Interior Varnish Stain and Stain & Varnish are premium, one-step products that make wood finishing simple, combining the colour of a traditional wood stain with the protective sheen of a polyurethane top coat. A blend of traditional dyes and tinters in polyurethane, the colour can be built up by applying successive coats until you achieve the required strength of colour desired.

All shades are pre-packaged and available in gloss or satin finishes. Remember that water-based products are cooler in tone, whereas oil-based products have a more golden tone, which can continue to develop over time. Consider these variances when choosing the product ideal for your timber project.

Interior Varnish Stain

XXX

Characteristics:	Low odour, quick drying
Uses:	All interior woodwork, solid timber, ply, veneer or MDF
Drying time:	30 mins touch dry / re-coat 3 hrs
Overcoat with:	Cabothane Water Based if required
Wash up:	Water

Colonial Baltic •	Red Mahogany •	Rich Walnut •


New Teak •	Jarrah RM	Teak NT
• Denotes pre-packaged colours. All samples shown on Gloss on Radiata Pine. Tint base legend: RM - Red Mahogany, NT - New Teak

Handy Hints

When the desired colour or transparency is achieved with one or two coats of varnish, finish the three-coat system with clear top coats. Eg: One coat varnish plus two coats clear = three-coat system

For fiddly, porous and hard to reach areas, seal first with Cabothane Water Based Satin (under Interior Varnish Stain) or Cabothane (under Stain & Varnish) to eliminate product ‘grabbing’ and building up.

Always stir contents thoroughly with a wide, flat bladed stirrer, such as a wooden ruler, before and during use. Do not shake cans as this action will aerate the contents and cause air bubbles in the coating. Stir with a scooping action.

Stain & Varnish

Characteristics:	High wear, rich golden tones
Uses:	All interior woodwork, solid timber, ply, veneer or MDF
Drying time:	2 hours touch dry / re-coat 8 hrs
Overcoat with:	Cabothane if required
Wash up:	Mineral Turps

Mahogany •	Western Jarrah •	Colonial Baltic •


Red Mahogany •	Rich Walnut •	Jarrah RM

New Teak •	Teak NT
• Denotes pre-packaged colours. All samples shown on Gloss on Radiata Pine. Tint base legend: RM - Red Mahogany, NT - New Teak