Cabot's Composite Transform

Cabot's Composite Transform is a water-based, one-coat solution designed to change the look of faded, compatible uncapped composite decking*. It is easy to apply, and has a semi-transparent finish. Best of all, you can be back on your deck in 1 hour^. It is recommended for use on lighter coloured compatible uncapped composite decking* for the best visual transformation. Perfect for those searching how to transform the look of faded composite decking, this product provides a reliable, simple and effective solution. Available in Brown, Grey, and Deep Red colour options.

*Compatible composite decking is uncapped composite decking in the Ekodeck Classic range and ModWood Natural Grain Brushed range only, and specifically excludes uncapped composite decking in the ModWood Natural Grain Smooth range. ^In conditions of 25°C and 50% relative humidity. Cold or humid conditions may require longer drying times.

View more
  • Water Wash Up
Cabot's Composite Transform
Cabot's Composite Transform
Cabot's Composite Transform
Cabot's Composite Transform
Cabot's Composite Transform

Available sizes

2 LITRE
  • Areas
    Uncapped composite decking in the Ekodeck Classic & ModWood Natural Grain Brushed ranges only
  • Clean Up
    Water
  • Sizes
    2L
  • Coverage
    12 M2/L
  • Safety Data Sheet
    Download document
Preparation

To prepare your compatible uncapped composite decking* for coating, first use Cabot's Composite Cleaner. Cabot's Composite Cleaner is an easy to use and effective cleaning
solution for composites to remove grease and grime. Use Cabot's Deck Prep brush to scrub the cleaner, following label instructions.

For any tough or stubborn stains, use Cabot's Composite Stain Remover.
Remove excess water from the surface with the squeegee on Cabot's Deck Prep brush, and allow the composite boards to completely dry before coating.
1.

Stir thoroughly with a broad flat paddle before and during use. Pour Cabot's Composite Transform into Cabot's Deck Hand™ bucket.
2.

Apply using Cabot's Deck Coat applicator along the length of the board. To seal exposed edges and end grain use a brush. Use a brush to cut in around the edges where required.
3.

Apply one coat. Allow to dry for 1 hour^ before going back onto your deck.
Maintenance

For best results, use Cabot's Composite Transform with the rest of the Cabot's
Composite Range.


When a recoat is required, clean the surfaces with Cabot's Composite Cleaner as per label instructions, and recoat with one coat of Cabot's Composite Transform for a refreshed look. Use Cabot's Composite Cleaner to refresh exterior composite and help remove dirt, grease and grime for everyday use.

How to clean, revive, or transform your faded compatible composite decking

You may also need

Cabot's Composite Stain Remover Cabot's Composite Stain Remover

Cabot's Composite Stain Remover is the easy-to-use spray that removes stubborn stains, grease, and grime without the use of bleach or harsh solvents.
Cabot's Composite Cleaner Cabot's Composite Cleaner

This everyday cleaner lifts away grease, grime and dirt from composite decking without the need for harsh bleach or solvents. It has a great Eucalyptus scent and is also safe for plants*
Cabot's Composite Revive Cabot's Composite Revive

Cabot's Composite Revive is a one coat only, water based maintenance coat that helps refresh the colour and finish of your faded compatible uncapped composite decking*. This easy to apply coating lets you get back on deck in 1 hour^.

Product Calculator

If you are unsure on how much product you need, please use our product calculator. Please note minimum length/width value is 1 metre and maximum is 50 metres.

1metre
1metre
Calculate
0 Total SQM
  • 0 SQM
  • 0 Litre

This website uses cookies to provide you with a better user experience. If you agree to our use of cookies, please accept this message and continue to use this site.