Cabot's CFP Floor Oil Based - Hardener
Zoom
For greater hardness and wear resistance in high-traffic areas, add Cabot’s CFP Hardener to CFP Floor Oil Based. This best timber floor hardener speeds up the hardening process and increases wear resistance. This wood floor hardener is only to be used with CFP Floor Oil Based.
| Areas |
|
|---|---|
| Sizes |
|
| Application |
Brush
Roller
Pad
|
| Pot Life |
8 hours |
| Full cure rate |
72 hours |
| Recoat |
12 hours |
| Coverage |
16 m2/L |
| Cleaning |
Turps
|
Downloads
Product Data Sheet
1
Measure Hardener
- Pour the required amount of CFP Hardener into Cabot's CFP Floor Oil Based at a ratio of 250ml per 4L.
- For other quantities, use 62ml of CFP Hardener per litre of Cabot’s CFP Floor Oil Based.
2
Stir Thoroughly
- Stir the mixture thoroughly to ensure even blending.
Hot tip!
Once mixed, the product must be used within 2 hours. Mix a fresh batch for each coat. Do not seal cans after mixing as pressure build up may occur.
Please note: All curing timings are quoted at 25°C and 50% humidity. Cooler, humid conditions and how heavy the coating was applied may extend this rate.
Apply using Brush, Pad applicator or Roller.
Do not apply by spray.
Cabot's CFP Floor Hardener Oil Based
Reactive hardener
Turps wash up
Greater hardness and wear resistance in shorter time
Cabot's CFP Floor Hardener Oil Based
Stock levels and product variants may vary across retailer websites due to ongoing inventory changes. Please review the retailer’s product page carefully before completing your purchase.
