Cabot's Floor Clean
Get those timber floors looking their sparkling best with this handy all-purpose floor cleaner. Its special formulation has been designed to act as a fast-acting cleaner, cutting through grease and grime. Ideal for use before preparing timber for a coat, or for rejuvenating and prolonging the life of your timber floor coatings.
| Areas |
|
|---|---|
| Sizes |
|
| Application |
Mop
|
| Touch Dry |
- |
| Recoat |
- |
| Coverage |
- |
| Cleaning |
- |
Downloads
Cabot's Floor Clean should not be used on fresh coatings that are less than 72 hours old. Ensure the surface has been cleaned with a duster or dust mop prior to using Cabot's Floor Clean to ensure loose particles of dirt are removed.
Floor mop
- Add approximately 50mls of Cabot's Floor Clean concentrate to 4 litres of water.
- Apply Cabot's Floor Clean to the floor with a mop to loosen grime and dirt. Do not flood the floor with cleaning solutions. Return excess solution to a bucket and allow the floor to dry.
Hot tip!
Floor may be slippery while wet. For Extra Dirty Floors Increase the amount of Cabot's Floor Clean concentrate to 100ml to 4L of water.
For Black Heel Marks Use Cabot's Floor Clean direct from bottle onto a rag and rub gently (rubber gloves should be worn).
Hot tip!
Cabot's Floor Clean will not remove coatings.
Cabot's Floor Clean
Cabot's Floor Clean
No Retailer Valid
No retailers available.
Calculate total usage
If you are unsure how much product you need, please use our product calculator. Please note minimum length/width is 1 metre and maximum is 50 metres.
Your approx need
Your measurements
Amount needed
This usage calculator provides a general guide only. Actual product requirements may vary based on surface type, condition and preparation, and application method.