Cabot's Interior Stain Oil Based
Zoom
Looking to transform the colour of your interior timber? Cabot's Interior Stain Oil Based is here for you! This oil based wood stain is easy to apply and transforms your timber without hiding the grain. Suitable for interior doors, windows, trim and furniture. It must be topcoated with Cabot's Cabothane Clear Oil Based.
| Areas |
|
|---|---|
| Sizes |
|
| Application |
Brush
Roller
|
| Touch Dry |
2 hours
|
| Recoat |
8 hours
|
| Coverage |
12 m2/L |
| Cleaning |
Turps
|
Product Data Sheet
Hot tip!
Sand the surface smooth using 180 - 240 grit sandpaper. Sand only in the direction of the grain. Remove all traces of sanding dust.
Completely remove the previous coating using a paint stripper or by sanding. Remove all traces of sanding dust.
IMPORTANT The natural colour of the timber will affect the finished colour of the stain. The clear coating used to seal the stain may also have some affect on the final colour. Always test the stain on an off cut or concealed part of the actual job before proceeding.
Hot tip!
Brush, Rag, Roller
- Stir thoroughly with a broad flat paddle until pigment is mixed in and colour is uniform. Keep well stirred during use. If using more than one can, mix all cans together into a larger container to ensure colour uniformity.
- Apply with a good quality brush, roller or lint free rag and work the stain evenly into the grain.
- Allow to set for 2-10 minutes then rub with a clean soft cloth using a circular motion to remove any excess stain and produce an even coloured surface. The intensity of the colour will depend on porosity of timber and the length of time before the stain is wiped off.
- Allow 8 hours drying time.
- Apply Cabot's Cabothane Clear Oil Based or Cabot's Danish Oil as a top coat following label instructions.
Regular inspection of all coated surfaces is recommended.
Once water repellancy has deminished, re-apply the existing topcoat as per label instructions.
If the timber needs re-staining, sand back to bare.
Cabot's Interior Stain Oil Based
Enhances timber grain
Oil enriched
Easy to apply
Clear top coat required
Select colour range
Colour - Maple
Timber type - Victorian Ash
Colour - Maple
Timber type - Radiata Pine
Colour - Walnut
Timber type - Victorian Ash
Colour - Cedar
Timber type - Victorian Ash
Colour - Walnut
Timber type - Treated Pine
Colour - Jarrah
Timber type - Victorian Ash
Colour - Jarrah
Timber type - Treated Pine
Colour - Cedar
Timber type - Treated Pine
Cabot's Interior Stain Oil Based
Calculate total usage
If you are unsure how much product you need, please use our product calculator. Please note minimum length/width is 1 metre and maximum is 50 metres.