Cabot’s Stain & Varnish Oil Based is the 2 in 1 interior timber hero! This easy to use stain varnish can be applied to all interior timber, and resists stains and scratches. It provides beautiful colour and shine without hiding the timber grain. Cabot's Stain & Varnish Oil Based can also be used on your interior timber flooring, it must be topcoated with Cabot's CFP Floor Oil Based.

Do not apply this product if the temperature is below 10°C or above 35°C.

1. Stir thoroughly with a broad flat paddle until pigment is mixed in and colour is uniform. Keep well stirred during use. If using more than one can, mix all cans together into a larger container to ensure colour uniformity.
2. Apply with a good quality brush or roller. 
3. Apply three coats depending on the required depth of colour, allowing 8 hours between coats. Sand between coats using 240 grit sandpaper.

Regular inspection of all coated surfaces is recommended. Re-coating is recommended when the coating looks dull or tired.

1. Clean with Cabot's Floor Clean following label instructions.

2. Sand with 240 grit sandpaper, remove all traces of sanding dust.

3. Apply 1-2 coats of Stain & Varnish.