Want to add colour and shine to your interior timber? Cabot's Stain & Varnish Water Based has got you covered! This varnish stain will enhance your timber's grain, and resist stains and scratches.

It's quick and easy to apply, with a 2 hour recoat time. Choose from our variety of varnish colours and get your job done in 1 day. Cabot's Stain & Varnish Water Based can also be used on your interior timber flooring if top coated with Cabot's CFP Floor Water Based.

Do not apply this product if the temperature is below 10°C or above 35°C.

How to Stain Your Interior Timber Furniture

1. Stir thoroughly with a broad flat paddle until pigment is mixed in and colour is uniform. Keep well stirred during use. If using more than one can, mix all cans together into a larger container to ensure colour uniformity.
2. Apply with a good quality brush or roller. 
3. Apply three coats depending on the required depth of colour, allowing 2 hours between coats. 
4. For best results, sand between coats using 240 grit sandpaper. COLOUR STRENGTH If the desired colour is achieved after 1 or 2 coats of Cabot's Stain & Varnish Water Based, use Cabot's Cabothane Clear Water Based to complete the 3 coat system.

Regular inspection of all coated surfaces is recommended. Re-coating is recommended when the coating looks dull or tired.

1. Clean with Cabot's Floor Cleaner following label instructions.

2. Sand with 240 grit sandpaper, remove all traces of sanding dust.

3. Apply 1-2 coats of Stain & Varnish Water Based.