Need to fill those holes, cracks and blemishes in your interior timber ? It’s all possible with Cabot's Wood Tone Putty! Easy to apply, it sands to a fine, smooth finish, blending seamlessly with your timber surfaces without shrinking. Compatible with water or oil-based paints, stains and timber finishes.

All timber surfaces should be thoroughly clean, dry and free from wax, oil, grease and other contaminants. Wash with mineral turpentine if needed to remove wax and grease, allow to dry and lightly sand dressed surfaces with "00" paper or finer, always in direction of the grain.

For interior use only.

Apply using Putty knife.

Apply to holes, cracks or blemishes with a putty knife taking care to push the putty into the cavity. Fill deep holes in thin layers. Do not smear into surrounding areas. Wipe off excess with a damp cloth. Allow to dry. Lightly sand across a broad area or along the length of a board. Avoid sanding vigorously or in spots, as this can close the grain and create uneven patches when subsequently stained or varnished.