How to restore your deck in 1 day

test
1

Get started with Cabot's Aquadeck

Almost any deck can be restored and brought back to life by following the steps outlined below.

Aquadeck is a highly durable, low odour water based decking oil is lightly pigmented and has been designed to enhance and protect the natural look of your exterior timber. Hard-wearing, it lasts two times longer than other oil-based decking oils – no more constant re-application!

Aquadeck's advanced dual technology allows natural oils to penetrate and nourish timber, creating a durable acrylic barrier for a beautiful natural finish. It is ideal for use on decks, garden furniture, pergolas, fences and gates.

Cabot's Aquadeck
Cabot's Aquadeck
Water Repelent
Water repellent
UV Protection
UV protection
Before
After
Before image After image
2
COATS

We used 2 coats of Cabot's Aquadeck Natural on Spotted Gum timber for this sample.

Preparation products & tools
Product image of Cabot's Aquadeck®
Cabot's Aquadeck®
Plus separator between products
Product image of Cabot's Deck Clean
Cabot's Deck Clean
Plus separator between products
Product image of Cabot's Signature Range Deck Prep
Cabot's Signature Range Deck Prep
Plus separator between products
Product image of Cabot's Signature Range Deck Pole
Cabot's Signature Range Deck Pole
Plus separator between products
Product image of Cabot's Signature Range Deck Coat
Cabot's Signature Range Deck Coat
Plus separator between products
Product image of Cabot's Signature Range Deck Hand™ Bucket
Cabot's Signature Range Deck Hand™ Bucket
2

Prepare

Before you get started, there are a few things you’ll need to do first – preparation is key!
Preparing the surface properly before you begin allows the oil to glide on smoothly for even coverage.

1
Remove Old Coatings

Use sandpaper or a paint stripper to thoroughly remove the existing coating from the timber surface.

2
Clean the Surface

Clean with Cabot’s Deck Clean following the instructions provided on the product label for best results.

1
Clean Thoroughly

Use Cabot’s Deck Clean to clean the timber surface completely, following the label instructions.

2
Perform Water Test

Sprinkle a small amount of water on the timber surface.

3
Assess the Result

If the water beads on the surface, the timber needs more sanding.

If the water soaks into the timber, it’s ready to be coated.

1
Sand the Timber

Sand back the surface to expose fresh wood.

2
Clean Thoroughly

Use Cabot’s Deck Clean to clean the surface and remove dust, dirt, and residue.

3
You're Good to Go

Once dried, your timber is ready for the next steps or use.

3

Apply

1
Stir Thoroughly

Use a broad, flat paddle to stir Cabot’s Aquadeck thoroughly before and during use.

2
Fill Holes and Imperfections

Use a suitable timber putty to fill any holes and surface imperfections before proceeding.

3
Apply with Deck Coat Applicator

Using the Cabot's Deck Coat Applicator, apply the product liberally along the length of each board, including exposed edges and the ends of each board.

4
Allow to Dry

After you’re finished applying, leave your deck to dry for one hour before applying a second coat. Too easy!

5
Enjoy!

And you’re done! Now all that’s left is to pull out those deck chairs, pour yourself a refreshing drink and get out into the sunshine.

How to bring life back to your deck in 4 simple steps☀️